Two-component, water-based acrylic paint with resins partly from renewable raw materials, Nickel-Nacreous coloured, with excellent filling and covering properties, yellowing resistance and surface hardness. applicable by spraying, on ABS, Polycarbonate, PA and PVC. Due to the wide range of ABS, PC, PA and PVC types, adhesion on the substrate to be painted must be tested beforehand on a sample of the material.
01_03072025
Property
Specification
Unit
Method
Density (20°C)
1,05 - 1,15
gr/cc
IST 11/01
Viscosity, Ford Cup 4 (20°C)
20 - 30
Sec.
IST 11/08
CVP0233
Property
Specification
Unit
Method
Density (20°C)
1,08 - 1,12
gr/cc
IST 11/01
Viscosity, Ford Cup 4 (20°C)
100 - 120
Sec.
IST 11/08
Solid Content
82,0 - 88,0
%
IST 11/06
The values describe the typical properties of the product. Technical Specifications are available upon request.
Harden the product at 5% by weight with CVP0233 hardener, dilute subsequently with water. The dilution of the product is determined at the time of application depending on the application parameters present, recommended 0% - 5% by weight. Apply by blending with a spray gun with a nozzle size of 1.0 to 1.3 millimetres and a pressure of 2 to 3 atmospheres.
A temperature of 70°C is recommended for drying after a short flash off time.
Keep it tightly sealed in its original container in a cool environment (between + 4°C and + 30°C) that is not subject to abrupt temperature excursions.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.