Solvent-borne Glossy, acrylic enamel, with High Gloss, characterized by high glossy retention even if exposed to bad weather conditions. It is used as top coat for refinishing and industrial vehicles.. Colourable in various shades with the addition of PPT 02 Series products . The enamel is also suitable to be applied on Epoxy Primers.
KOAT701
Property
Specification
Unit
Method
Density (20°C)
1,40 - 1,50
Gr/cc
IST 11/01
Ford Cup 4 Viscosity (20°C)
60 - 80
Sec.
IST 11/08
Dry Residue
70,0 - 78,0
%
IST 11/06
CVP0208
Property
Specification
Unit
Method
Density (20°C)
1,04 - 1,10
gr/cc
IST 11/01
Viscosity, Ford Cup 4 (20°C)
10 - 15
Sec.
IST 11/08
Solid Content
64 - 74
%
IST 11/06
The values describe the typical properties of the product. Technical Specifications are available upon request.
If it is required a colored product, add the products of the PPT 02 series to the converter in the proportion and quantities suggested by the tintometric system. Stir well after adding. Harden the converter mixture at 33% by weight with the CVP0208 hardener; subsequently, thin it with DPV0006. The thinning of the product is established at the time of application according to the application parameters present, recommended at 10% by weight. The substrate must be perfectly clean, dry, degreased and free from contaminants; The substrate must have a temperature between + 5°C and + 30°C, and in any case at least 3°C higher than the Dew Point. Apply with a spray gun having a nozzle from 1,3 to 1,5 millimeters and with a pressure of 2 to 3 bar.
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.